The “Pause” light should be off, if it isn’t press and release the “3 Sec” button to turn it off. The position of the right-hand guide is only important in that it should be used to support the form and keep it feeding in straight.

Please note: There is more wiggle room in the paper feed tray than on the OKI and you may need to adjust both the left-hand guide and/or shift the paper feed tray to adjust the alignment left or right. Step 2 : Move the left-hand paper guide in line with the mark on the paper feed tray. You will want to move the tray selector to the back-most position.

Step 1 : On the top right is the paper feed selection lever. With the printer installed, and capable of printing a Windows test page, let's set the printer up to work with Frazer. If the driver is not listed as the model of your printer, simply give Frazer's tech support a call at 88 and a customer service representative will be happy to help you get your printer setup with the correct drivers. Note: If you discover issues with your printer working from Frazer, simply verify that the driver used for the printer is the 'Epson LQ 590III ESC/P2' (or your specific model). For more information about installing a printer / printing a Windows test page, click here. Most of the time your printer will install via plug-and-play, simply plug the printer in, connect the USB and Windows will take care of the rest. As we work our way through setting things up, photos of the specific item mentioned will be attached to the setup. These photos are provided as a means to get to know your new printer.

Welcome to the Epson Dot Matrix printer page! In this article you will learn about the different models of printers that Frazer is compatible with as well as step-by-step instructions for setting your printer up to work with Frazer.

Epson test page